Class C Supply 80KA Industrial Lightning Protection Feature:
• 40 kA up to 80 kA parafoudre spd.
• Visual status display
• The Class C series of over-voltage surge protective devices has been developed to protect against the effects of indirect lightning discharges and induced voltages and is intended to provide protection in zones 1 2 per IEC 62305.
• Labeled connections
• Type 2 (class II/C) for main boards, distribution boards and consumer units.
• Available with and without remote signalling contacts.
• 1 pole up to 4 poles protected.
• BR-80 consists of a high performance varistor block with thermal disconnection device. The plug-in module/base design facilitates replacement of a failed module in situ without the need to remove system wiring.
• Solutions to meet IEC 61643-1 and EN 61643-11
Class C Supply 80KA Industrial Lightning Protection Product Details:
| |
BR-80 150 4P |
BR-80 275 4P |
BR-80 320 4P |
BR-80 385 4P |
| SPD classification according to EN61643-11 |
Type 2 |
Type 2 |
Type 2 |
Type 2 |
| SPD classification according to IEC61643-11 |
Class II |
Class II |
Class II |
Class II |
| Max. continuous operating a.c. voltage Uc |
150V |
275V |
320V |
385V |
| Nominal discharge current (8/20us) In |
40kA |
40kA |
40kA |
40kA |
| Max. discharge current(8/20μs) Imax |
80kA |
80kA |
80kA |
80kA |
| Voltage protection level Up |
≤1.0kV |
≤1.7kV |
≤2.0kV |
≤2.3kV |
| Voltage protection level 5kA Up |
≤0.6kV |
≤1kV |
≤1.1kV |
≤1.2kV |
| Max. backup fuse |
160A gG |
160A gG |
160A gG |
160A gG |
| Response time tA |
≤25ns |
≤25ns |
≤25ns |
≤25ns |
| Operating temperature range Tu |
-40℃-80℃ |
-40℃-80℃ |
-40℃-80℃ |
-40℃-80℃ |
| Operating state / fault indication |
green / red |
green / red |
green / red |
green / red |
| Cross-section area (Min.) |
4mm2 |
4mm2 |
4mm2 |
4mm2 |
| Cross-section area (Max.) |
35mm2 |
35mm2 |
35mm2 |
35mm2 |
| For mounting on |
35mm Din rail |
| Enclosure material |
Thermoplastic UL94-V0 |
| Degree of protection |
IP20 |
IP20 |
IP20 |
IP20 |
| Order Code |
B18276 |
B18278 |
B18280 |
B18282 |
| Order Code (With remote signaling) |
B18277 |
B18279 |
B18281 |
B18283 |
Dimension:
Class C Supply 80KA Industrial Lightning Protection Product Description:
• The combination lightning current and surge arrestors BR-80 meet the type 2 requirement class according to IEC 61643-11.
• These devices protect low-voltage consumer systems from overvoltage of all types and are available in single-pole to four-pole versions.
• The use of high-performance varistors permits a rapid response time and a low protection level, without any line follow current.
• Available with optional remote signalling
• Usable in systems with lightning protection class 2
Class C Supply 80KA Industrial Lightning Protection Advantage:
1. CE, TUV, CB, ISO9001 Certificates
2. More than 21 years, manufacture experience
3. 90% of our products are exported to Europe, South America, Africa and Asian other countries.
4. Strong technological capacity, advanced production testing equipment.
Use of attention:
1. The PE line of the lightning arrester must be reliably connected with the ground wire of the lightning protection system, and the connection line is short, thick and straight.
2. After correct installation, it can work steadily for a long time. If it is found that the transmission performance of the system is reduced or the signal is interrupted due to the cause of surge protection, it should be maintained or replaced in time.
Our price is cheaper than obo spd price list and phoenix spd price list.
Packing&Shipping:
Our products will be packed as follow: Box inside, carton outside.
Shipping: By sea, by air or by express up to customer
Company Introduction:
Wnzhou Britec Electric factory is a professional manufacturer, specialized in SPDs. The factory was founded in 2003 in Yueqing, Zhejiang, China. Main products are: AC surge protector, DC (PV) surge protection device, data lightning protection, LED lightning protective device and most of products got CE and TUV certificated.
Our workshop:
Our certificate:
FAQ:
1. Q: What is the MOQ of an order?
A: We accepts 100pcs as trial order.
2. Q: What are your payment methods?
A: T/T, 30% in advance, 70% balance before delivery.
3. Q: What is the delivery time?
A: It takes about 25 days usually after receipt of your deposit. Please check with us if available stock.
4. Q: How about customization?
A: ODM/OEM business partner will be warmly welcome. Please contact us for more details.
5. Q: Where is your factory located? How can I visit there?
A: Our factory is located in Yueqing city, Zhejiang province.
Your message must be between 20-3,000 characters!