Home ProductsType 2 Surge Protection Device

40kA Three Phase AC SPD Electrical Manufacturer Plastic Thunder Arrester

40kA Three Phase AC SPD Electrical Manufacturer Plastic Thunder Arrester

  • 40kA Three Phase AC SPD Electrical Manufacturer Plastic Thunder Arrester
  • 40kA Three Phase AC SPD Electrical Manufacturer Plastic Thunder Arrester
40kA Three Phase AC SPD Electrical Manufacturer Plastic Thunder Arrester
Product Details:
Place of Origin: China
Brand Name: BRITEC
Certification: CE
Model Number: BR-40 4P
Payment & Shipping Terms:
Minimum Order Quantity: 200 piece / pieces
Packaging Details: EXPORT PACKING
Delivery Time: 15-30 days after payment
Payment Terms: T/T
Supply Ability: 50000 pieces per month
Contact Now
Detailed Product Description
Categories: Surge Protector Model: AC SPD
In: 20kA Imax: 40kA
TA: ≤25ns Material: Thermal Plastic UL94-V0
Mounting On: 35mm Din Rail Tu: -40℃...+80℃
Terms Of Payment: T/T FOB Port: Ningbo/Shanghai Port

 

40kA Three Phase AC SPD Electrical Manufacturer Plastic Thunder Arrester

 

40kA Three Phase AC SPD Description:

 

  • • BR-40 AC SPD series surge protection device (in short SPD, alias: surge suppressor surge arrester) is suitable for TN-S, TN-C-S, TT etc., power supply system of AC 50/60Hz. It's designed according to IEC61643-1, GB18802.1, it adopts 35mm standard rail, there is a failure release mounted on the module of surge protection device, when the SPD fails in breakdown for over heat and over-current, the failure release will help electric equipment separate from the power supply system and give the indication signal, green means normal, red means abnormal.
    Intensity of Remote Signalling Alarm Contact
    AC Type 2 SPD is the secondary protection system for all low voltage electric installations. This is installed in to each electrical switch boards and prevents the spread of surges in the electric systems, protecting the loads. Generally used for incomer feeders of main distribution panels.
    Failure indication and centralized remote signalling alarm dry contacts;
    BR-40 series Surge Protection are designed to protect against lighting surge voltages. These units must be installed in parallel on the AC networks to be protected and provide common and differential modes protection.
    High discharge capacity and low residual voltage;
    Over-temperature protection;
    IP20, UL94 V0

 

40kA Three Phase AC SPD Product Details:

 

  BR150 40 4P BR275 40 4P BR320 40 4P BR385 40 4P BR440 40 4P
SPD classification according to EN61643-11 Type 2 Type 2 Type 2 Type 2 Type 2
SPD classification according to IEC61643-11 Class II Class II Class II Class II Class II
Max. continuous operating a.c. voltage           Uc 150V 275V 320V 385V 440V
Nominal discharge current (8/20us)                 In 20kA 20kA 20kA 20kA 20kA
Max. discharge current(8/20μs)                   Imax 40kA 40kA 40kA 40kA 40kA
Voltage protection level                                   Up   ≤0.8kV ≤1.3kV ≤1.5kV ≤1.8kV ≤2.0kV
Voltage protection level 5kA                            Up ≤0.6kV ≤1kV ≤1.2kV ≤1.4kV ≤1.6kV
Max. backup fuse 125A gL 125A gL 125A gL 125A gL 125A gL
Response time                                                 tA ≤25ns ≤25ns ≤25ns ≤25ns ≤25ns
Operating temperature range                          Tu -40℃-80℃ -40℃-80℃ -40℃-80℃ -40℃-80℃ -40℃-80℃
Operating state / fault indication    green / red       green / red     green / red      green / red      green / red   
Cross-section area (Min.) 4mm2 4mm2 4mm2 4mm2 4mm2
Cross-section area (Max.) 35mm2 35mm2 35mm2 35mm2 35mm2
For mounting on 35mm Din rail
Enclosure material Thermal plastic UL94-V0
Degree of protection IP20 IP20 IP20 IP20 IP20
Order Code B8401 B8403 B8405 B8407 B8409
Order Code (With remote signaling) B8402 B8404 B8406 B8408 B8410

 

Technology characteristic:

 

40kA Three Phase AC SPD Electrical Manufacturer Plastic Thunder Arrester 0

 

40kA Three Phase AC SPD Product Details Show:

 

  • • Maximum current of endure the lightning stroke 40KA.
    Conform to IEC61643-11 standards.
    Pluggable with mechanical & remote indication.
    Surge arrestor / type 2
    Thermal disconnect device.
    Time of response<25ns.
    Protective equipment for equipotential bonding in main and secondary distribution boards
    The color of visible window shows operating status, green means normal, red means abnormal.
    High-performance varistor system

 

Our Services:

 

  • • 17 years global leading profession manufacture of electrical products surge arrester
    • All products will be well packed before shipping
    • Standard packaging, and you can also tell us your own requirements on packaging
    • Faster delivery
    • Individually Tested Prior to Shipment

 

Installation:

 

  • • The type 2 arresters must install into sub-distribution boards after main distribution boards containing type 1
      arresters.
    • For proper operation between type 1 and type 2 arresters at least 10- 15 m cable or wire must be otherwise a
      decoupling coil have to install between the two devices.
    • In areas where storms are frequent, it is strongly recommended to install additional protection systems.

 

Certificate:

 

40kA Three Phase AC SPD Electrical Manufacturer Plastic Thunder Arrester 1

 

Company profile:

 

40kA Three Phase AC SPD Electrical Manufacturer Plastic Thunder Arrester 2

 

Production flow:

 

40kA Three Phase AC SPD Electrical Manufacturer Plastic Thunder Arrester 3

 

Laboratory equipment:

 

40kA Three Phase AC SPD Electrical Manufacturer Plastic Thunder Arrester 4

 

Shipping:

 

40kA Three Phase AC SPD Electrical Manufacturer Plastic Thunder Arrester 5

 

FAQ:

 

1 How long is your products warranty ?

A: The warranty period of our products is 2 years.

 

2 How about inspection?

A: We have the whole inspection system from raw material to end products.

 

3 What do you have for certificate?

A: Our products are passed through CE, TUV, CB standarded.

 

4 What is payment terms?

A: T.T, Paypal and L/C is acceptable.

 

5 What is the service offered by company?

A: We have the professional enginer team which can design and develop the mold to arrive different customer nequirement. We also have the sales team to offer good service from pre-sale to after-sale.

 

6 How to become the agents for Britec?

A: It is OK! We will depend on the sales turn over and also do research on your market. If your have interest,let us discuss more !

 

 

Contact Details
Britec Electric Co., Ltd.

Contact Person: Xu

Tel: +8615657751280

Send your inquiry directly to us
Best Products
Other Products