Home ProductsType 2 Surge Protection Device

35mm Din Rail AC Class C 1 Phase 1P 60kA Type 2 Surge Protector

35mm Din Rail AC Class C 1 Phase 1P 60kA Type 2 Surge Protector

  • 35mm Din Rail AC Class C 1 Phase 1P  60kA Type 2 Surge Protector
  • 35mm Din Rail AC Class C 1 Phase 1P  60kA Type 2 Surge Protector
35mm Din Rail AC Class C 1 Phase 1P  60kA Type 2 Surge Protector
Product Details:
Place of Origin: China
Brand Name: BRITEC
Model Number: BR275-60 1P
Payment & Shipping Terms:
Minimum Order Quantity: 100 Piece/Pieces
Packaging Details: EXPORT PACKING
Delivery Time: Shipped in 15 days after payment
Payment Terms: L/C, D/A, T/T, Western Union
Supply Ability: 50000 Piece/Pieces Month
Contact Now
Detailed Product Description
Mounting: Din Rail 35mm Keyword: AC SPD
Brand Name: Britec Circumstances Temp: -40℃-80℃
Application: Surge Protective Device Is Suitable For Single-phaseTN System Protective Level: IP20
Pole Number: 1P Type: Type 2 Class C
Number Of Phase: 1 Phase Uc: 275V
In: 30kA Max Discharge Current: 60kA
High Light:

60kA type 2 surge protector

,

60kA type 2 surge arrester

,

1P type 2 surge protector

1 Phase 35mm Din rail 1P 60kA AC Class C Surge Protection Device

 

BRITEC Type 2 Class C Surge Protection Application:

 

Surge arrester applied for single-phase power supply systems. Applicable for C class protection, it adapts to LPZ1-LPZ2 lightning protection area.
 

BRITEC Type 2 Class C Surge Protection Parameters:

 

Model Name BR275-60 1P
Brand BRITEC
Product Type Surge Protection Device
SPD dassification according to EN61643-11 Type 2
SPD dassification according to EN61643-11 Class II
Max. Continuous Voltage                   Uc 275V
Max. discharge current (8/20µs)              Imax 60kA
Norminal discharge current (8/20µs)            In 30kA
Voltage protection level                               Up ≤1.5kV
Max. backup fuse 200A gL
Response time                                             tA ≤25ns
For mounting on 35mm Din rail
Degree of protection IP20
Manufacturer Guarantee 2 Years Guarantee
No. of Phases Single-Phase
Number of Poles one pole
Operation temperature range -40 ~ +80 degree
Remote control contacts Optional

 

Dimension:

 

35mm Din Rail AC Class C 1 Phase 1P  60kA Type 2 Surge Protector 0

 

BRITEC Type 2 Class C Surge Protection Device Features:
 

1) Hot-pluggable.

2) Status indicator: Green-OK, Red-Failed.

3) Working temperature: -40°C-80°C; Relative humidity: 5%-95%.

4) Housing protection level (IEC 60529): IP20.

5) Housing material fram-retarded level (Ul94): UL94-V0.

 

BRITEC Type 2 Class C Surge Protection Advantage:
 

+ Visual status display.

+ Available with optional remote signalling.

+ Vibration-proof.

+ Combination arrestors for buildings with lightning protection.

+ Simple standard hat rail mounting.

+ Labelled connections.

+ Usable in systems with lightning protection class 2.

 

BRITEC Type 2 Class C Surge Protection Product installation:

 

1. SPD apply to power distribution system 275V second-level lightning protection, it is installed in parallel on into the line side of the total power distribution equipment or the power distribution box in the buildings, with 35mm electrical lead rail, Kevin connections can be used. Cut off the power before installation, strictly prohibit powered operation.

2. Before installation please according to installation diagram of connections, including L1, L2, L3 all are the phase line, N is zero line, PE is ground line, please connect correctly. When installation is complete, close the automatic circuit breaker, check the working condition is normal or not.

3. During using lightning protection module, we should monitored and check the status display window regularly, when the display window was red or remote terminal output signal ,it means the lightning protection module failure, it should be promptly repaired or replaced.

4. Apply to indoor operation, such as outdoors installation, you must install waterproof shell.

5. All wirings must be solid and connected by electric.

6. Lightningproof grounding should be consistent with lightning protection regulatory requirements, grounding wire should be as thick and short as possible.

 

Company profile:

 

Wenzhou Britec Electronic Co., Ltd. is a professional engaged in SPD products research and development, design, production and service in the integration of modern professional surge protection production enterprises, production base is located in Yueqing, Zhejiang, China. With OEM/ODM high standard production workshop, has a new standard of high-end production equipment, perfect supporting factory layout is reasonable, the spacious production workshop, according to the international surge protector factory standard production design, is the domestic strong r & d manufacturers.

 

35mm Din Rail AC Class C 1 Phase 1P  60kA Type 2 Surge Protector 1

 

Our certificate:

 

35mm Din Rail AC Class C 1 Phase 1P  60kA Type 2 Surge Protector 2

 

Workroom:

 

35mm Din Rail AC Class C 1 Phase 1P  60kA Type 2 Surge Protector 3

 

FAQ:

 

Q1: What is the MOQ of each item?
  A: Usually the MOQ is 100 pcs. If this product we have in stock, there is no limitation for MOQ.

 

Q2: Do you have any guarantee for products?
  A: Yes, sure. All products have two years guarantee.

 

Q3: Are you a factory or a trading company?
  A: We are a factory with trading lines. We have in SPD field for more than 17 yeas. We have full

      experience of producing surge protection device. 

 

Q4: How to control the quality?
  A: Each product must be test before shipment. Our production line full with professional skills and strict

      stardars.

 

Q5: How long does it take to delivery?
  A: If have stock, within 1-2 week we can finished all the delivery. If no have stock, normally around 2-3

      weeks, depends on order.

 

 

Contact Details
Britec Electric Co., Ltd.

Contact Person: Xu

Tel: +8615657751280

Send your inquiry directly to us
Best Products
Other Products