Home ProductsT1+T2 Surge Arrester B+C

Pluggable Class 1 + 2 (B + C) Lightning Arrester Surge Protector SPD 10/350 12.5kA 4P

Pluggable Class 1 + 2 (B + C) Lightning Arrester Surge Protector SPD 10/350 12.5kA 4P

  • Pluggable Class 1 + 2 (B + C) Lightning Arrester Surge Protector SPD 10/350 12.5kA 4P
  • Pluggable Class 1 + 2 (B + C) Lightning Arrester Surge Protector SPD 10/350 12.5kA 4P
  • Pluggable Class 1 + 2 (B + C) Lightning Arrester Surge Protector SPD 10/350 12.5kA 4P
Pluggable Class 1 + 2 (B + C) Lightning Arrester Surge Protector SPD 10/350 12.5kA 4P
Product Details:
Place of Origin: China
Brand Name: BRITEC
Certification: CE
Model Number: BR-12.5M-275 4P
Payment & Shipping Terms:
Minimum Order Quantity: 200 piece / pieces
Packaging Details: EXPORT PACKING
Delivery Time: 15-30 days after payment
Payment Terms: T/T
Supply Ability: 50000 pieces per month
Contact Now
Detailed Product Description
Item Name:: Combined Surge Protector Model Number:: BR-12.5M-275 4P
Material:: Thermal Plastic Class: Class B + C
Pole Number:: 4P Tu: -40℃-80℃
Iimp: 12.5kA Standard:: IEC61643-11
Up: ≤1.3kV Imax: 50kA
High Light:

single phase surge arrester

,

lighting surge arrester

 

Pluggable Class 1 + 2 (B + C) SPD 10/350 12.5kA 4P Surge Protector

 

Product Description:

 

• Combined Type 1+2/Class I+II surge protection devices.
• Modular type.
• Lightning impulse current (10/350μs): 12.5kA per phase.
• Uc: 275V.
• Pluggable design.
• Less than 25ns response time.
• Use red/green status indicator.
• Remote signaling.
• DIN-rail mountable.
• Tested according to IEC 61643-11 for type I and II surge protection.

 

Product Details:

 

  BR-12.5M-275 4P
SPD classification according to EN 61643-11 Type 1 + Type 2
SPD classification according to IEC 61643-11 Class I + Class II
Max. continuous operating a.c. voltage                         Uc 275V
Lightning impluse current (10/350us)                          Iimp 12.5kA
Nominal discharge current (8/20us)                                In 20kA
Max. discharge current (8/20us)                                 Imax 50kA
Voltage protection level                                                 Up ≤1.3kV
Voltage protection level 5kA                                          Up ≤1.0kV
Max. backup fuse 160A gG
Response time                                                                tA ≤25ns
Operating temperature range                                         Tu -40℃—80℃
Operating state / fault indication green / red
Cross-section area (Min.) 4mm2
Cross-section area (Max.) 35mm2
For mounting on 35mm Din rail
Enclosure material                  Thermal plastic UL94-V0                 
Degree of protection IP20


Technology characteristic:

 

Pluggable Class 1 + 2 (B + C) Lightning Arrester Surge Protector SPD 10/350 12.5kA 4P 0

 

Application:
 
• To prevent power supply equipment from being damaged by surge and lightning.
• Suitable for lightning protection zones III & IV.
• Use on buildings in applications where there is an external lightning protection system installed,
  usually installed at the service entrance or main distribution board.
• Widely used in the transformer low-voltage side of the main distribution room as the first protection of
  the power supply.
 
Advantage:
 
• Large discharge capacity.
• Low voltage protection level.
 
Installation:
 
• Install in the main distribution cabinet/box of the low-voltage cabinet and the incoming line cabinet.

 

About Shipping:

 

1. DHL / UPS / FedEx / TNT, Door-to-Door.
2. By Air or by Sea, for FCL/LCL; Airport/ Port receiving.
3. Customers Specifying Freight Forwarders or Negotiable Shipping Methods.
4. We choose the best and safe packaging material to make sure your orders won’t be damaged during

   delivery.

 

Pluggable Class 1 + 2 (B + C) Lightning Arrester Surge Protector SPD 10/350 12.5kA 4P 1

 

Company information:

 

Pluggable Class 1 + 2 (B + C) Lightning Arrester Surge Protector SPD 10/350 12.5kA 4P 2

 

Certificate:

 

Pluggable Class 1 + 2 (B + C) Lightning Arrester Surge Protector SPD 10/350 12.5kA 4P 3

 

FAQ:

 

Q1: What is lead time for samples and mass production?

A1: Samples usually takes 7-10days if material in stock; Inventory: Can be shipped out within 1-3day;

      Mass production: at 15-30days.

 

Q2: Can the sample charge be refunded or deducted from the payment for goods?

A2: Yes, the sample fee will refund once the order placed.

 

Q3: Can you do a custom logo on the products?

A3: Yes, we can print your logo in our products.

 

Q4: Can you do a custom package we want?

A4: Yes, we can, the MOQ is usually 500pcs per design. For more information, please kindly contact

      our salesman.

 

Q5: Can we order the color we want?

A5: Yes If your order quantity meets the MOQ.

 

Contact Details
Britec Electric Co., Ltd.

Contact Person: Xu

Tel: +8615657751280

Send your inquiry directly to us
Best Products
Other Products