Home ProductsPV Surge Arrester

3 Poles DC 600V Photovoltaic Surge Protector 40kA Solar Surge Protection Device

3 Poles DC 600V Photovoltaic Surge Protector 40kA Solar Surge Protection Device

  • 3 Poles DC 600V Photovoltaic Surge Protector 40kA Solar Surge Protection Device
  • 3 Poles DC 600V Photovoltaic Surge Protector 40kA Solar Surge Protection Device
3 Poles DC 600V Photovoltaic Surge Protector 40kA Solar Surge Protection Device
Product Details:
Place of Origin: China
Brand Name: BRITEC
Certification: CE
Model Number: BRPV3-600GD
Payment & Shipping Terms:
Minimum Order Quantity: 200 piece / pieces
Packaging Details: EXPORT PACKING
Delivery Time: 15-30 days after payment
Payment Terms: T/T
Supply Ability: 50000 pieces per month
Contact Now
Detailed Product Description
Test Standards: EN61643-11 / EN50539-11 Ucpv: 600V
Imax: 40kA Material: Thermal Plastic UL94-V0
TA: ≤100ns Mounting On: 35mm Din Rail
Up: ≤2.6kV Tu: -40℃...+80℃
High Light:

dc surge arrester

,

dc surge suppressor

 
3 Poles DC 600V Photovoltaic Surge Protector 40kA Solar Surge Protection Device
 
Feature:
 

  • • Type 2 Class II surge protection device.
    • Discharge current: Imax up to 40 kA.
    • Configurations to support 600V DC operating voltages.
    • Compact equipment for photovoltaic installations.
    • DIN Rail mounting design with pluggable modules.
    • High discharge capacity via zinc oxide varistors and gas dischargers.
    • Visual indication of a fault in the equipment.
    • Safety disconnection and remote signalling.


Product Details:
 

  BRPV3 600 GD
SPD classification according to EN61643-11Type 2
SPD classification according to EN50539-11Class II
Max. continuous operating dc voltage                            Ucpv600V
Nominal discharge current (8/20us)                                    In20kA
Max. discharge current (8/20us)                                     Imax40kA
Voltage protection level [(DC+/DC-)→PE]                         Up≤2.6kV
Response time                                                                             tA≤100ns
Operating temperature range                                             Tu-40℃-80℃
Operating state / fault indicationgreen / red
Cross-section area (Min.)4mm2
Cross-section area (Max.)35mm2
For mounting on35mm Din rail
Enclosure material               Thermal plastic UL94-V0               
Degree of protectionIP20
Order CodeB8005
Order code(With remote signal)B8007

 
Technology characteristic:
 
3 Poles DC 600V Photovoltaic Surge Protector 40kA Solar Surge Protection Device 0
 
Application:
 

  • • Protect PV inverters, operate safely on the PV networks, and DC side of Inverter or combiner
      box.
    • For equipotential bonding of positive and negative busbars of photovoltaic systems and
      elimination of transient overvoltage that originates during the atmospheric discharges or
      switching processes.
    • For Photovoltaic protection against surges at the boundaries from lightning protection.
     

Advantage:
 

  • • High temperature resistant plastic.
    • Plug-in protection modules which facilitate maintenance, easy to install wiring.
    • Operational status indication.
    • Remote monitoring.
    • With thermal separation device.


Our Services:
 

  • • 17 years global leading profession manufacture of electrical products surge arrester.
    • All products will be well packed before shipping.
    • Standard packaging, and you can also tell us your own requirements on packaging.
    • Faster delivery.
    • Individually Tested Prior to Shipment. 

 
Installation instruction:
 

• The SPD connected in parallel with the power lines, installed by the way of 35 mm leading rail.
• When installed, in and out terminal of SPD will be corresponding connected with"+","-"pole of the DC
  power; " PE " is connected with grounding line.
• All wires must be solid and connected by electrics cable.SPD cable:BVR≥4mm².
• Grounding of lightning protection should comply with the lightning protection standard; grounding wire
  should be as thick and short as possible.
• The grounding wire of SPD reliable connected with the grounding row of lightning protection system,
  after installation finished, check the wires if correct, switch on, then the SPD can be put into use.
 
Company profile:
 
3 Poles DC 600V Photovoltaic Surge Protector 40kA Solar Surge Protection Device 1
 
Testing:
 
3 Poles DC 600V Photovoltaic Surge Protector 40kA Solar Surge Protection Device 2
 
Certification:
 
3 Poles DC 600V Photovoltaic Surge Protector 40kA Solar Surge Protection Device 3
 
Shipping:
 
DELIVERY TIME: 15-30 days after confirming order,detail delivery date should be decided according to
production season and order quantity.
 
3 Poles DC 600V Photovoltaic Surge Protector 40kA Solar Surge Protection Device 4
 
FAQ:
 

Q1: How long is your products warranty?
  A: The warranty period of our products is 2 Years.
 
Q2: What is the service offered by company?
  A: We have the professional enginer team which can design and develop the mold to arrive different
      customer requirement. We also have the sales team to offer good service from pre-sale to after-sale.
 
Q3: Are you a manufacturer or a trading company?
  A: We are the manufacturer, welcome OEM and ODM.
 
Q4: Where is your company located?
  A: Our factory is located in the Yueqing city, Zhejiang Province, China.
 
Q5: What are your main products?
  A: Our main products are AC surge arrester, PV (solar) surge protection device, data surge protector,
      LED lightning protective device etc.
 

 

Contact Details
Britec Electric Co., Ltd.

Contact Person: Xu

Tel: +8615657751280

Send your inquiry directly to us
Best Products
Other Products